SLIM FUSINA

Find out more

SLIM FUSINA

Find out more

Slim Fusina Rolling Srl is operating as an integrated plant with Cast house, Rolling Mill and Finishing Lines.

The facility, which is in Fusina, close to Venice, has a maximum capacity of approximately 75.000 tons per year on a total covered area of 125.000 square meter, and employees more than 300 persons.

With the slogan “Wide, Thick, and Hard”, Slim Fusina has been serving for more than 50 years many Customers in marine, commercial transportation, industrial & automotive, with products covering a gauge range from 2 mm. to 110 mm., both medium and hard alloys.

Our Cast house has a Slab production capacity of 95.000 tons per year, 90% hard alloy + 10% medium alloy; it includes 2 complete Melting/Casting lines, each one with melting furnace, holding furnace, degasser, filtration unit and casting pits.

In the Hot Rolling area, there is slab preparation section with Scalper and preheating

The Sheet flow path is equipped with an IBK Cold Mill up to a width of 2500mm, that is feeding 3 different Cut to Length lines.

The necessary intermediate and final annealing treatments are performed by 3 Annealing furnaces to reach the requested temper. Metallurgical properties are designed to fit Customer requirements in terms of mechanical and forming performance.

A continuous annealing furnace is used for all the quenched alloy

Plate flowpath is using a stretcher, one annealing furnace and two saws, allowing a maximum gauge up to 70mm; unstretched material can be produced up to 110 mm. Brushed finishing is also possible on this flowpath.

Slim Fusina Rolling Srl is operating as an integrated plant with Cast house, Rolling Mill and Finishing Lines.

The facility, which is in Fusina, close to Venice, has a maximum capacity of approximately 75.000 tons per year on a total covered area of 125.000 square meter, and employees more than 300 persons.

With the slogan “Wide, Thick, and Hard”, Slim Fusina has been serving for more than 50 years many Customers in marine, commercial transportation, industrial & automotive, with products covering a gauge range from 2 mm. to 110 mm., both medium and hard alloys.

Our Cast house has a Slab production capacity of 95.000 tons per year, 90% hard alloy + 10% medium alloy; it includes 2 complete Melting/Casting lines, each one with melting furnace, holding furnace, degasser, filtration unit and casting pits.

In the Hot Rolling area, there is slab preparation section with Scalper and preheating

The Sheet flow path is equipped with an IBK Cold Mill up to a width of 2500mm, that is feeding 3 different Cut to Length lines.

The necessary intermediate and final annealing treatments are performed by 3 Annealing furnaces to reach the requested temper. Metallurgical properties are designed to fit Customer requirements in terms of mechanical and forming performance.

A continuous annealing furnace is used for all the quenched alloy

Plate flowpath is using a stretcher, one annealing furnace and two saws, allowing a maximum gauge up to 70mm; unstretched material can be produced up to 110 mm. Brushed finishing is also possible on this flowpath.

Slim Cisterna

Slim Aluminium S.p.A.

Piazzale dell’Alluminio

04012 Cisterna di Latina (LT)

Italia

 

+39 06 96 83 01

info.cisterna@slimalu.com

Slim Fusina

Slim Fusina Rolling S.r.l.

Via dell’Elettronica, 31

30176 Fusina (Venezia)

Italia

 

+39 041 29 17 111

info.fusina@slimalu.com

Slim Merseburg

Slim Merseburg GmbH

August-Bebel-Straße 1,

06217 Merseburg

Germany

 

+49 3461 2840

info.merseburg@slimalu.com

Slim Cisterna

Slim Aluminium S.p.A.

Piazzale dell’Alluminio

04012 Cisterna di Latina (LT)

Italia

 

+39 06 96 83 01

info.cisterna@slimalu.com

Slim Fusina

Slim Fusina Rolling S.r.l.

Via dell’Elettronica, 31

30176 Fusina (Venezia)

Italia

 

+39 041 29 17 111

info.fusina@slimalu.com

Slim Merseburg

Slim Merseburg GmbH

August-Bebel-Straße 1,

06217 Merseburg

Germany

 

+49 3461 2840

info.merseburg@slimalu.com